- Out-of-Stock
Transparent UHMW polyethylene tape from Lee Valley that reduces friction on jigs, fences, drawers and mitre gauges. 25 mm × approx. 5.5 m.
Slippery Tape from Lee Valley made of UHMW (ultra-high molecular weight) polyethylene, for surfaces that need to slide easily against each other.
The tape is transparent and has a pressure-sensitive adhesive backing that holds well. Use it, for example, on drawers and drawer runners, machine fences and jointer fences, under mitre gauges and on jigs such as crosscut sleds.
Made in Canada.
Specifications: width 25 mm (1"), length approx. 5.5 m (18'), thickness 0.13 mm (5 mil), UHMW polyethylene, self-adhesive.
Which plane to start with depends on what you will do, but for most people a smoothing plane (No. 4) or a jack plane (No. 5) is a good first choice. The smoothing plane gives smooth surfaces, and the jack plane is a versatile plane for both rough work and truing edges.
Low-angle jack planes such as the Lie-Nielsen No. 62 and the Veritas low-angle jack are also popular all-round planes. A block plane is a good addition for end grain and chamfers. The guide explains how the hand plane is built and which types exist.
Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.
Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.