Lie-Nielsen Hand Scraper Set
kr395.00
Tax included
Two 64 × 152 mm hand scrapers in Swedish high-carbon tool steel, one supple at 0.5 mm and one stiffer at 0.8 mm. The long edges are ground square.
Set of two hand scrapers from Lie-Nielsen, made from the same thin, hard high-carbon Swedish tool steel as Lie-Nielsen saw blades. The steel is hardened and tempered to Rockwell 49–51.
The thinner 0.5 mm scraper is very supple and can be flexed to remove local blemishes and tear-out. The thicker 0.8 mm scraper is much stiffer. The long edges are ground square, so the scrapers are easy to prepare.
A burr is turned with a burnisher, such as the Lie-Nielsen Carbide Burnisher.
Includes: 2 scrapers 64 × 152 mm (2-1/2" × 6"), thickness 0.5 mm (0.020") and 0.8 mm (0.032"). Swedish high-carbon tool steel, Rockwell 49–51.
1-HSet
Data sheet
- Antal i sats
- 2 st
- Längd (mm)
- 152 mm
- Typ av handverktyg
- Rektangulär sickel
Specific References
- MPN
- 1-HSet
- HS code
- 82053000
Most Lie-Nielsen plane blades, chisels and mortise chisels are made of A2 tool steel. The steel is cryogenically treated, hardened to 60–62 HRC and double tempered, and takes and holds a very fine edge for a long time.
The blades are surface ground on the top, back and edge, so they quickly take a mirror finish. Some tools are available in O1 carbon steel, which gets very sharp and is easy to sharpen. The product name then says O1.
A card scraper is a thin steel plate that scrapes smooth surfaces, especially on difficult wood. It is sharpened in three steps: the edge is filed straight, honed smooth and then turned into a small burr with a burnisher. The burr is what cuts.
When the scraper stops making shavings, you can often turn the burr again with the burnisher. The guide shows it step by step.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
Discover more
Two 64 × 152 mm hand scrapers in Swedish high-carbon tool steel, one supple at 0.5 mm and one stiffer at 0.8 mm. The long edges are ground square.