- Out-of-Stock
Lie-Nielsen Carbide Burnisher
kr985.00
Tax included
Burnisher with a polished solid carbide shank, 102 mm long and 6.4 mm in diameter, in a cherry handle. For turning a burr on scrapers.
Turning a burr on a scraper needs a hard, highly polished surface. The Lie-Nielsen burnisher has a polished solid carbide shank that is harder than the scraper steel and gives an even burr.
The shank is held in a cherry handle with a flared brass bolster that protects your fingers while burnishing.
Suits, for example, the Lie-Nielsen Hand Scraper Set (1-HSet).
Solid carbide shank, length 102 mm (4"), diameter 6.4 mm (1/4"). Cherry handle, brass bolster.
1-Burnisher
Data sheet
- Handtagsmaterial
- Körsbär
- Typ av handverktyg
- Sickeljärn i hårdmetall
Specific References
- MPN
- 1-Burnisher
- HS code
- 82055980
Most Lie-Nielsen plane blades, chisels and mortise chisels are made of A2 tool steel. The steel is cryogenically treated, hardened to 60–62 HRC and double tempered, and takes and holds a very fine edge for a long time.
The blades are surface ground on the top, back and edge, so they quickly take a mirror finish. Some tools are available in O1 carbon steel, which gets very sharp and is easy to sharpen. The product name then says O1.
A card scraper is a thin steel plate that scrapes smooth surfaces, especially on difficult wood. It is sharpened in three steps: the edge is filed straight, honed smooth and then turned into a small burr with a burnisher. The burr is what cuts.
When the scraper stops making shavings, you can often turn the burr again with the burnisher. The guide shows it step by step.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
Viewed products
Discover more
Burnisher with a polished solid carbide shank, 102 mm long and 6.4 mm in diameter, in a cherry handle. For turning a burr on scrapers.