Subcategories

  • Narex Richter Chisels
    Narex Richter Chisels

    Narex stämjärn i Richter serien

    Dessa stämjärn bär namnet Richter som en hyllning till grundaren af firman Narex. Denna serie är tillverkad med extra hög kvalité av både stål och i sitt utförande. Stålet i dessa stämjärn är Cr-V, fär hållbarhet och skärpa,  och dessa är efter härdning cryogenbehandlade, kylda ner till en temperatur på ca −190 °C !

  • Veritas® Bench Chisels
    Veritas® Bench Chisels
  • Veritas® Mortise Chisels
    Veritas® Mortise Chisels

    Veritas® Mortise Chisels

    These are substantial mortise chisels. The blades are more than 1/2" thick at the heel of the bevel and are a consistent width from tip to shoulder for accurate registration in a mortise.

    The chisel sides are slightly relieved to reduce sidewall friction and allow for minor cut corrections. Each has a 25° primary bevel to make deep cuts easier, with a 35° secondary bevel to give them a durable cutting edge. To aid in levering out waste, the heel of the bevel is rounded to provide a smooth fulcrum. A2 or PM-V11® tool steel versions are available.

    The blade-to-handle connection is made with a tang and a socket-like ferrule. The tang has flats to prevent the handle from rotating. Turned from a solid blank, the ferrule seats directly onto the shoulder of the blade.

    The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilizing it against swelling and shrinkage caused by humidity changes. The handle is contoured to fit the hand nicely, with shallow flats parallel to the blade sides to provide tactile cues for blade alignment and finger placement. The end is domed and has a stainless-steel hoop to resist chipping and deformation from mallet blows.

    Overall lengths range from 11-5/8" to 12-1/4"; blade lengths (including bolster) range from 5-5/8" to 6-1/4". Only final honing is required before use.

  • Veritas PM-V11 Butt Chisel
    Veritas PM-V11 Butt...

    Veritas® PM-V11™ Butt Chisels


     

  • Veritas Flushing Chisel
    Veritas Flushing Chisel

    Antique Flushing Chisels

    Historically, this type of chisel is associated with the pattern maker’s trade.

    Modern technology eliminated the handwork involved with making a mold pattern; as such, chisels made in this form are now seldom found.

    The longer paring chisel supplants a normal cutting tool and allows for close, fine removal of excess material when refining a workpiece that may already be assembled. The longer blade provides a firm reference point when cutting to a flat surface.

    Bent or “cranked-neck” versions were especially prized, as the clearance helped one retain control when cutting.

    This later, American-made 1930s version had just one interchangeable handle used with a series of blades.

    This two-piece construction provided greater control after heat treating and prior to finish grinding, controlling warping and giving a coplanar surface over the length of the blade. Edwin Walker first patented this type of chisel assembly in 1884 (#291,820) and refined it in 1886 (#357,429).

  • Lie-Nielsen chisels
  • Lie Nielsen Mortise Chisels
    Lie Nielsen Mortise...

    Lie Nielsen Mortise Chisels


    Designed with cabinetmaking in mind, not timber framing, these well-balanced Mortise Chisels are ground with parallel sides and are taller than they are wide to help keep them straight in the cut.
    Lie-Nielsen Mortise Chisels have Hornbeam handles. Chisels are illustrated with Heartwood Hornbeam.

    Our Mortise chisels are made of A-2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Length ranges from 9 ¾" (smaller sizes) to 11" (1/2").

    Plane maker Larry Williams requested that we make a 1/10” Mortise chisel for his work.
     

  • Henry Taylor Chisel
    Henry Taylor Chisel

    Henry Taylor Timmermansjärn - när du vill ha ett stadigt och stabilt timmermansjärn är dessa dom du behöver!

  • Japanes Chisels
    Japanes Chisels

    Japanes Chisels

     

     

  • Japanes Mortise Chisel
    Japanes Mortise Chisel
  • Narex chisels
    Narex chisels

    Narex premium chisels
     

  • Narex Mortice chisel
    Narex Mortice chisel

    Mortice chisel, Narex premium.

    Mortice chisels are also a good deal less expensive than morticing machines, so for people making individual pieces of furniture they throw a nice chunk of money back into your budget.

    Accurate, hard and immensely tough, these Czech made Narex 8112 mortice chisels are correctly profiled, remarkably tough and seriously good value for money.
     

  • Narex Cranked-neck paring chisel
    Narex Cranked-neck...
  • Narex boxes
    Narex boxes

    Här samlar vi våra Narex samlingslådor.

  • Narex paring chisel
    Narex paring chisel
  • Bacho chisels
    Bacho chisels

    Här finns den klassiska röda handtaget.

Active filters