Veritas Set of 3 Miniature Chisels
kr502.50
Tax included
This chisel set is made at about 1/3 the scale of the Veritas bench chisels; each is only about 3 1/4" long and weighs less than a third of an ounce. The three chisels have 3/8", 1/4" and 1/8" wide blades, and all permit a delicate touch where fine, controlled cuts are needed.
This chisel set is made at about 1/3 the scale of the Veritas bench chisels; each is only about 3 1/4" long and weighs less than a third of an ounce. The three chisels have 3/8", 1/4" and 1/8" wide blades, and all permit a delicate touch where fine, controlled cuts are needed.
The 3/32" thick PM-V11 blades are hardened to Rc61-63, ground flat on the face and have a 25° bevel. The handles are hardwood with stainless-steel ferrules.
Supplied in a French-fitted embossed leatherette box. Made in Canada.
05P85.01
Specific References
- EAN13
- 722356016640
- MPN
- 05P8501
- HS code
- 8205300000
Which plane to start with depends on what you will do, but for most people a smoothing plane (No. 4) or a jack plane (No. 5) is a good first choice. The smoothing plane gives smooth surfaces, and the jack plane is a versatile plane for both rough work and truing edges.
Low-angle jack planes such as the Lie-Nielsen No. 62 and the Veritas low-angle jack are also popular all-round planes. A block plane is a good addition for end grain and chamfers. The guide explains how the hand plane is built and which types exist.
Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.
Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
Viewed products
This chisel set is made at about 1/3 the scale of the Veritas bench chisels; each is only about 3 1/4" long and weighs less than a third of an ounce. The three chisels have 3/8", 1/4" and 1/8" wide blades, and all permit a delicate touch where fine, controlled cuts are needed.