- -5%
- Pack
Veritas Small Shoulder Plane, PM-V11
kr2,921.25
kr2,775.19
Save 5%
Instead of kr2,921.25
Tax included
The smallest Veritas shoulder plane, 12.7 mm wide, for one-handed use. Adjustable mouth and 15° bed angle for end grain. PM-V11 blade.
The small shoulder plane is the smallest in the Veritas range and is designed to be held and guided with one hand. It is used to fine-tune rabbets, grooves, tenons and other areas that are hard to reach with a larger plane.
The lever cap wraps around the rear of the body and covers the adjuster, so it stays out of the way of your hand, and also forms a rest for your palm. A through-hole and textured recesses in the sides give your fingers a secure hold.
The body is ductile cast iron, machined so that sole and sides are flat and square to each other. The adjustable toe lets you close the mouth for thin shavings and less tear-out.
The 15° bed angle and 25° bevel give a 40° cutting angle that works well in end grain. Side set screws locate the blade, so it needs no lateral adjustment when refitted after sharpening. Made in Canada.
Sole length 159 mm (6 1/4"), width 12.7 mm (1/2"). Blade 12.7 mm (1/2") wide and 3.2 mm (1/8") thick, lapped, PM-V11. Bed angle 15°, bevel angle 25°. Weight 510 g (1 lb 2 oz).
Supplied with a PM-V11 blade.
05P47.71
Data sheet
- Hyveltyp
- Simshyvel
- Bredd (tum)
- 1/2" (13 mm)
- Sulans längd
- 150–249 mm
- Bäddvinkel
- 15°
- Material
- Segjärn
- Stål ingår
- Ja
Specific References
- MPN
- 05P4771
- HS code
- 82053000
Which plane to start with depends on what you will do, but for most people a smoothing plane (No. 4) or a jack plane (No. 5) is a good first choice. The smoothing plane gives smooth surfaces, and the jack plane is a versatile plane for both rough work and truing edges.
Low-angle jack planes such as the Lie-Nielsen No. 62 and the Veritas low-angle jack are also popular all-round planes. A block plane is a good addition for end grain and chamfers. The guide explains how the hand plane is built and which types exist.
A shoulder plane and a rebate plane both have a blade that reaches the edges, but they are used for different tasks. The shoulder plane is narrow and precise and is used to trim tenon shoulders and adjust joints, often on end grain. The rebate plane often has a fence and depth stop and is used to cut rebates along an edge.
The guide explains when to choose which.
Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.
Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
The smallest Veritas shoulder plane, 12.7 mm wide, for one-handed use. Adjustable mouth and 15° bed angle for end grain. PM-V11 blade.