- -5%
- Pack
- Out-of-Stock
Veritas Bullnose Plane, PM-V11
kr2,168.75
kr2,060.31
Save 5%
Instead of kr2,760.00
Tax included
Bullnose plane that converts to a chisel plane in seconds. For cleaning up machine-cut joints and working right into blind corners. 15° bed, 40° cutting angle, PM-V11 blade.
The Veritas bullnose plane is made for trimming joints, rabbets and shoulders after machining. It works in two ways: as a bullnose plane or, with the toe removed, as a chisel plane. The toe is released with a brass locking knob, and without it the blade reaches right into a blind corner.
A set screw in the toe acts as a stop. It sets the mouth opening, returns the toe to the same setting when it is refitted and stops the nose from being pushed against the cutting edge. With a tight mouth the plane takes very fine shavings with little risk of tear-out.
The body and toe are ductile cast iron, machined and ground so that the sole and sides are flat and square to each other. The low, broad lever cap sits comfortably in the palm, and the forefinger rests in a pocket in the toe for good control.
The bed angle is 15° and the blade has a 25° bevel, giving a 40° cutting angle that also works well on end grain. Set screws along the side keep the blade in position, so it can be refitted after sharpening without lateral readjustment. The blade is lapped and made of PM-V11.
Length 121 mm (4 3/4"), width 25 mm (1"), blade thickness 3.2 mm (1/8"), bed angle 15°, bevel angle 25°, PM-V11 blade, weight just over 0.57 kg (1 1/4 lb). Made in Canada.
05P42.71
Data sheet
- Hyveltyp
- Simshyvel
- Sulans längd
- Under 150 mm
- Bäddvinkel
- 15°
- Material
- Segjärn
- Stål ingår
- Ja
Specific References
- MPN
- 05P4271
- HS code
- 82053000
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
Viewed products
Bullnose plane that converts to a chisel plane in seconds. For cleaning up machine-cut joints and working right into blind corners. 15° bed, 40° cutting angle, PM-V11 blade.