Tormek T-4 Bushcraft
kr5,913.75
Tax included
Tormek T-4 Bushcraft is a limited edition especially targeting the outdoor market. All the equipment needed to sharpen knives and axes is included straight out of the box.
Tormek T-4 Bushcraft is a limited edition especially targeting the outdoor market. All the equipment needed to sharpen knives and axes is included straight out of the box.
Included in the box:
Tormek T-4 wet grinder
Knife Jig SVM-45
Axe Jig SVA-170
Stone Grader SP-650
AngleMaster WM-200
Honing Compound PA-70
Tormek Handbook on sharpening
Instructional DVD
With this equipment you can sharpen almost every type of knife, including kitchen knives, and axes. Sharpening with Tormek is safe and gives your tools a long-lasting razor edge. For more detailed information about the machine, see the product page for Tormek T-4.
Both machines sharpen all common edge tools with the same jig system. The difference is in size and capacity:
Tormek T-4 – 200 mm grindstone, 120 W motor for intermittent use (30 min per hour), weighs 8 kg. For home and hobby use.
Tormek T-8 – 250 mm grindstone, solid cast housing with minimal play and an industrial motor for continuous use, weighs 14.8 kg. For those who sharpen a lot.
The T-8 Custom is a T-8 without stone and honing wheel, so you choose your own. The T-4 Bushcraft is a T-4 with a knife jig and axe jig in the box.
First choose the right grindstone size: 200 mm for the T-4 and 250 mm for the T-8. Then choose by what you sharpen:
Original grindstone SG – an all-round stone supplied with the machine. With the SP-650 stone grader you change the surface from 220 grit to about 1000 grit.
Blackstone Silicon SB – for high-speed steel (HSS), such as turning tools
Japanese water stone SJ – 4000 grit for a polished, razor-sharp edge
Diamond wheel DC, DF or DE – 360, 600 or 1200 grit, for any material including ceramics and carbide. Use the ACC-150 anti-corrosion concentrate in the water.
The jigs are usually not included with the machine; you choose them by the tools you want to sharpen. All jigs fit both the T-4 and the T-8:
SE-77 – chisels and plane blades with a straight or slightly cambered edge
KJ-45 and KJ-140 – centring knife jigs for symmetrical bevels
SVD-186R – turning gouges, carving gouges and V-tools
SVS-50 – skew chisels, parting tools and carving tools
AX-40 – axes
SVX-150 and SC-60 – scissors
SVH-320 – planer blades
DBS-22 – twist drills 3–22 mm
The HTK-906 and TNT-808 kits collect the most common jigs for hand tools and woodturning respectively.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
16 other products in the same category:
Viewed products
Tormek T-4 Bushcraft is a limited edition especially targeting the outdoor market. All the equipment needed to sharpen knives and axes is included straight out of the box.