Veritas A2 Toothed Blade 1-5/8 38° Bevel Block Planes
search
  • Veritas A2 Toothed Blade 1-5/8 38° Bevel Block Planes
  • Veritas A2 Toothed Blade 1-5/8", 38°, Block Plane - 05P22.06

Veritas A2 Toothed Blade 1-5/8", 38° Bevel, Block Planes

kr436.25
Tax included

A2 toothed blade from Veritas, 41 mm wide, 38° bevel, for the standard and low-angle block planes. For difficult grain and knots.

Quantity

Toothed blade in A2 tool steel from Veritas, an optional blade for the Veritas standard and low-angle block planes. The edge has small square teeth that work the most difficult grain, especially around knots, with minimal tear-out. The teeth leave a textured surface that you then smooth with a card scraper or a finely set plane.
Lapped blades with 25°, 38° and 50° bevels in A2, O1 or PM-V11 are also available for the same planes.
Blade width 41 mm (1 5/8"), bevel angle 38°, steel A2.

05P22.06

Data sheet

Hyveltyp
Stöthyvel
Bladtyp
Tandat stål
Stålsort
A2
Bredd (tum)
1 5/8" (41 mm)
Passar märke
Veritas
Fasvinkel
38°

Specific References

EAN13
722356002490
MPN
05P2206
HS code
82053000

There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.

A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.

Read the guide here

Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.

Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.

Read the guide here

A new replacement iron can make an old plane better than it was when new. To find the right one, measure the iron's width, thickness and slot dimensions, and check whether the plane has a cap iron and what kind of adjuster it has.

A thicker iron chatters less but may require the mouth to be adjusted. The guide shows how to measure and choose correctly. You can also send us a photo of the iron with a rule beside it, and we will help you. We do not sell adjusting screws or other spare parts for old Stanley planes.

Read the guide here

Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.

Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.

How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.

You might also like

Comments (0)
No customer reviews for the moment.

Discover more

How Hand Planes Are Built – a Short History
21 October 2026 | Techniques