Hock replacement blade in high-carbon steel for the Stanley No. 12, 12 1/2 and 112 scraper plane, 73 × 127 mm and 2,4 mm thick.
A replacement blade from Hock for the Stanley No. 12, 12 1/2 and 112 scraper plane. It is made from high-carbon steel and hardened for a balance between long edge life and ease of rolling a burr with a burnisher. The cutting edge is ground at 45°. The 3/32" thickness is stiffer than the 1/16" version and is the most popular choice.
The blade is prepared like an ordinary card scraper and fitted to the scraper plane, where it gives an even, controlled cut on difficult surfaces and figured wood.
Specifications: width 73 mm (2 7/8"), length 127 mm (5"), thickness 2,4 mm (3/32"), high-carbon steel.
Data sheet
Specific References
There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.
A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.
Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.
Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.
A new replacement iron can make an old plane better than it was when new. To find the right one, measure the iron's width, thickness and slot dimensions, and check whether the plane has a cap iron and what kind of adjuster it has.
A thicker iron chatters less but may require the mouth to be adjusted. The guide shows how to measure and choose correctly. You can also send us a photo of the iron with a rule beside it, and we will help you. We do not sell adjusting screws or other spare parts for old Stanley planes.