Sharpening tool with 400 and 600 grit abrasive paper for the inside edge of hook knives, removing nicks and scratches. Followed by the Hook Strop.
The Flexcut Hook Hone is used to sharpen the inside edge of any hook knife. It uses abrasive paper, which works faster than stropping and removes nicks and scratches from the edge.
After sharpening, the wire edge is removed and the edge polished with the Flexcut PW17 Hook Strop. The tool suits, for example, the Flexcut KN26 and KNL26 hook knives and the KN52 sloyd hook knife.
Includes:
400 grit abrasive paper
600 grit abrasive paper
Instructional guide
Made in the USA.
Data sheet
Specific References
There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.
A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.
Which water stone you need depends on how dull your edges are and how fine a finish you want. A common setup is a coarse stone around 1000 grit to shape the edge and a fine stone around 5000–8000 grit to polish it. For chipped edges you need a coarser stone too.
Water stones wear unevenly and need flattening regularly. The guide explains grits, brands and flattening.
You might also like