Tormek DBS-22 Drill Bit Sharpening Attachment
kr2,883.75
Tax included
With the Tormek DBS-22 Drill Bit Sharpening Attachment you can sharpen drill bits from 3 to 22 mm (7/64"–7/8") with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material.
With the Tormek DBS-22 Drill Bit Sharpening Attachment you can sharpen drill bits from 3 to 22 mm (7/64"–7/8") with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills.
4-facet point: you create a 4-facet point, which gives the ideal cutting performance since the chisel edge gets a point instead of being almost flat as on many drills. A 4-facet point will not walk, and the thrust force required is considerably reduced compared to a conventional cone point drill. A precision sharpened 4-facet point generates less heat, so the life of the drill is also prolonged. Independent tests show that a Tormek sharpened drill lasts up to 4 times longer than a brand new conventional drill bit.*
Controlled sharpening: the edge is cooled continuously, so there is no risk of the steel overheating, losing its hardness or getting micro cracks. You have full control all the time and can see how the sharpening proceeds.
* Uddeholm Tooling AB, 2010. 15 mm deep holes were drilled in toughened steel with 6 mm drills at 1326 rpm and 0.15 mm feed per rotation. The Tormek sharpened drills lasted on average 327 holes, while the new drills with an S-shaped point lasted 72 holes.
The jigs are usually not included with the machine; you choose them by the tools you want to sharpen. All jigs fit both the T-4 and the T-8:
SE-77 – chisels and plane blades with a straight or slightly cambered edge
KJ-45 and KJ-140 – centring knife jigs for symmetrical bevels
SVD-186R – turning gouges, carving gouges and V-tools
SVS-50 – skew chisels, parting tools and carving tools
AX-40 – axes
SVX-150 and SC-60 – scissors
SVH-320 – planer blades
DBS-22 – twist drills 3–22 mm
The HTK-906 and TNT-808 kits collect the most common jigs for hand tools and woodturning respectively.
There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.
A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
14 other products in the same category:
With the Tormek DBS-22 Drill Bit Sharpening Attachment you can sharpen drill bits from 3 to 22 mm (7/64"–7/8") with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material.