Veritas Right-Angle Saw Guide. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface.
Following many requests for a 90° version of the Veritas dovetail saw guide, this right-angle saw guide was developed for finger joints, tenons and on-the-spot trimming of small items. It is also ideal for beginners or children learning to make perfectly square perpendicular cuts on board ends.
Made from the same precision-machined aluminium extrusion as the Veritas dovetail saw guides, each reference surface has an embedded 3/4" rare-earth magnet and a low-friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4" to 1" thick.
The guide can be used with any backless saw that has approximately 0.005" or less of tooth set. The Veritas dovetail saw is a suitable companion. With a 2" x 8-1/2", 22 tpi blade, the dozuki tooth form is effective in both crosscuts and rip cuts.
Data sheet
Specific References
Which handsaw to choose depends on the tooth pattern and the number of teeth per inch (tpi). Rip teeth cut along the grain and crosscut teeth across it. Few teeth give fast but rough cuts, and many teeth give slower, cleaner cuts.
Backsaws such as tenon saws and dovetail saws are used for precise joinery. The guide covers tooth patterns, sharpening and choosing a saw.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.