Henry Taylor long thin bevel edge paring chisel, 3/4". The relatively thin blade tapers towards the cutting edge and is approximately 7 1/2" long. Paring chisels are pushed by hand, without a mallet, for fine cuts and trimming joints.
Long thin bevel edge paring chisel from Henry Taylor of Sheffield, 3/4" (20 mm). The blade is longer than on a standard chisel, relatively thin and tapers towards the edge, with bevels on three faces. The paring chisel is used by hand, without a mallet, with one hand on the handle and the other on the blade, for thin, controlled shavings and paring joints. The blade is forged, hardened, tempered and hardness tested for long edge life. May need a final honing before use.
Facts:
Width 20 mm (3/4")
Blade length approx. 190 mm (7 1/2")
Bevels on three faces
Handle approx. 140 mm (5 1/2") in stained beech with brass ferrule
Data sheet
Specific References
There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.
A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.
You might also like