Lee Valley Conical Diamond Sharpeners for Economy Hollow Mortise Chisels
kr168.75
Tax included
Pair of Lee Valley conical diamond hones for economy hollow mortise chisels for mortisers and drill presses: one for the basic grind, one for a corner micro-bevel.
A pair of conical diamond hones from Lee Valley for sharpening the economy hollow mortise chisels used in mortisers and drill-press mortising attachments.
The hone is chucked in a drill and sharpens the inside of the chisel's square cutting end. One hone is used for the basic grind and the other to put a micro-bevel on the chisel corners, which need a higher bevel angle for strength.
Suit the Lee Valley economy hollow mortise chisels, for example the 1/4", 5/16", 3/8" and 1/2" sizes.
Supplied as a pair: one hone for the basic grind and one for the micro-bevel.
77J81.20
Specific References
- MPN
- 77J8120
- HS code
- 6804300000
There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.
A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.
Which water stone you need depends on how dull your edges are and how fine a finish you want. A common setup is a coarse stone around 1000 grit to shape the edge and a fine stone around 5000–8000 grit to polish it. For chipped edges you need a coarser stone too.
Water stones wear unevenly and need flattening regularly. The guide explains grits, brands and flattening.
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
Pair of Lee Valley conical diamond hones for economy hollow mortise chisels for mortisers and drill presses: one for the basic grind, one for a corner micro-bevel.