- Out-of-Stock
The Kreg Pocket-Hole Jig 310 makes it easier than ever to build wood projects, whether it's your first or you have been woodworking for years. It works with material from 13 to 38 mm thick and has a hardened-steel drill guide and thickness stops for 13, 19 and 38 mm, for both boards and plywood.
The Kreg Pocket-Hole Jig 310 makes it easier than ever to build wood projects, whether it's your first or you have been woodworking for years. It works with material from 13 to 38 mm thick and has a hardened-steel drill guide and thickness stops for 13, 19 and 38 mm, for both boards and plywood. Where space is tight, you can remove the thickness stop for better access.
The 310 can be used as a single drill guide, several can be mounted together, and it can be combined with the Pocket-Hole Jig 320 for even more versatility. The included material-thickness gauge and easy-set drill bit make setup simple, and the GripMaxx anti-slip base holds the jig precisely in position while you drill.
All Kreg pocket-hole jigs drill the same type of pocket hole. The difference is how fast and conveniently you work:
R3 and 310 – small and portable, good for occasional projects and repairs
320 – two drill guides for faster work
520PRO – the most versatile, with VersaGrip clamping that rotates 360°
720 and 720 PLUS – a bench jig with Automaxx auto-adjust clamping for 13–38 mm material, for bigger projects
XL – extra-large pocket holes in 2 × 4 and 4 × 4 timber
The drill bit for Kreg pocket-hole jigs is 9.5 mm (3/8"). If you are unsure, the 720 is the most convenient choice for furniture and joinery.
Two things decide which Kreg screw you need for your pocket hole:
Length – by the material thickness, for example a 25 mm screw in 13 mm material, 32 mm in 19 mm material and 64 mm in 38 mm material
Thread – coarse thread for soft wood such as pine, plywood and MDF, fine thread for hardwoods such as oak and beech
Kreg screws have a wide head that pulls the joint tight and a self-drilling tip that reduces the risk of splitting. The screw kits contain the most common lengths and threads and are a good start if you are new to pocket-hole joinery.