- Out-of-Stock
JessEm Pow-R-Tek SR (Spindle Router) motor, 230 V, engineered and tested in Canada. The motor is rated at 3 1/4 hp with a 4.2" diameter, the result of more than a year of development and a study of the router motors on the market.
JessEm Pow-R-Tek SR (Spindle Router) motor, 230 V, engineered and tested in Canada. The motor is rated at 3 1/4 hp with a 4.2" diameter, the result of more than a year of development and a study of the router motors on the market.
Facts:
Motor diameter 4.2"
Speed 10,000 to 22,000 rpm
Bearings rated for 30,000 rpm
ER collets 1/4" and 1/2"
The JessEm Pow-R-Tek SR router motor uses standard ER20 collets. It only comes with collets for 1/4 and 1/2 inch, so for bits with 6, 8 or 12 mm shanks you will need to buy additional collets.
ER20 collets are available from well-stocked machinery and online shops. They are sometimes sold in a fixed size (for example 12 mm) and sometimes as a range (for example 12–13 mm) that covers every size in between.
Note that only the collet itself can be swapped, not the nut, because the JessEm nut has a different thread from the one commonly used in Sweden. We do not sell ER20 collets ourselves.
The JessEm Mast-R-Lift II is not tied to the JessEm motor. You can use any round router or router motor within the lift size range, which is a motor diameter of 81.7–106.7 mm, for example models from Bosch, DeWalt, Porter Cable and Makita.
The JessEm Pow-R-Tek router motor is the largest that fits, and the Trend T1 is the smallest we have found that fits.
You might also like