Quad MFT Hinge System

The latest addition to the Benchdogs range and one of the most asked-for products. Here is our Quad MFT Hinge System.

Our Hinge System allows you to attach it to all types of Multifunction Tables with 20mm holes without having to attach it to an extrusion like the MFT3 from Festool or others using a variety of extruded aluminium profiles.

All that is required to set this up is to have some additional holes, which can be made with our 346-hole jig MK3 and a 4mm Hex Key, to tighten the quad dog bases.

Simple and easy to set up on the Job site, Workshop or Home hobby setup.

Setting the holes for the hinge requires a max of 35mm from the edge and can be set with 32, 48 or 64mm from your first row of holes. This can be achieved with the 346-hole jig MK3.

To offer the best accuracy, the hinge systems will come with a track-specific alignment pin and rail bolts, but additional track sets can also be purchased.

What you will receive
1 x Quad Hinge System
1 x Quad Hinge Support
1 x Alignment Pin (selected by brand)
2 x Rail Bolts (selected by brand)
4 x 20mm Quad Bases
4 x M6 x 25 Countersunk fixings
1 x 4mm Hex Key

Universal, can be used from left to right or Right to Left setups.
No extrusion is required.
Made with precision machines 6082 Aluminium.
Brackets, Plates & fixings are made with 304 Stainless Steel.
Under Rail Support stop for Benchdogs Fence.
Compatible with most tracks with a t slot on the underside of the rail.
MFT Inaccuracy adjustment