SawStop Scale Miter Gauge

SawStop scale miter gauge. The precision protractor head has a pointer and 90 detents in 1° increments each side of 0°, including 22.5° on each side, and a built-in vernier scale for fine-tuning in 1/10° increments.

The 18" miter bar fits common 3/8" × 3/4" miter slots and has six adjustable washers to eliminate side-to-side play while gliding smoothly. A screw-on T-clip at the front holds the bar level when the head is pulled off the table.

The aluminium fence gives a larger reference for holding work and telescopes to 31-1/2" (34" with the flip stop). A T-slot in the front takes auxiliary wood fences, and the scale on top can be calibrated for precise crosscuts without measuring. The flip stop indexes along the fence in 1/32" increments, and its two arms can be set independently or linked with a rod, with a built-in micro-adjuster.

Facts:
Angle range 90° left to 90° right, 181 detents
Miter bar 3/8" x 3/4" x 18"
Fence height 2-3/8"
Fence length 18-1/4" retracted, 31-1/2" extended
Fits T-slots: 3/4" at top, 1" at bottom, 3/8" deep
Weight 2.81 kg