Lee Valley try, rafter and miter square, a reproduction of an antique tool in the Lee Valley collection. It simplifies the often complex layout of both rafters and miter joints.
Lee Valley try, rafter and miter square, a reproduction of an antique tool in the Lee Valley collection. It simplifies the often complex layout of both rafters and miter joints.
The original, patented in 1914, resembles a speed square but has a movable fence that locks at various standard miter, rafter and hip rafter angles. To set an angle, a sliding pointer on the pivoting fence registers in the holes of one of three scales, and the brass thumbscrew locks pointer and fence.
For plumb cuts on common or hip rafters, and end cuts on collar ties, select pitches from 1 to 12 (for example, the #4 common rafter setting gives a 4/12 pitch) and mark the line directly from the square, with no calculations or rafter tables.
The 13 miter indexing holes, numbered 4 to 24, set the angles needed for polygons with that number of sides. For example, #4 gives the 45° angles for a four-sided construction and #8 the 22.5° angles for an octagon.
The square is 11 1/4" along the hypotenuse, with a 10 1/4" pivoting fence and an 8" fixed fence, both 5/16" thick for reliable registration. The angle settings on the front and the imperial scale on the back are dark etched for contrast against the stainless-steel blade. Deceptively simple, with complex geometry built in. Made in Canada.