- Out-of-Stock
Veritas Large Router Plane
kr2,513.75
Tax included
Large router plane for dadoes, grooves, hinge gains and inlay work cut to a precise depth. Screw feed with 0.8 mm (1/32") per turn, lockable depth stop and two 12.7 mm (1/2") blades included.
A router plane takes a surface down to a set depth, for example in stopped or through dadoes and grooves, when recessing hardware, and for inlay and intarsia where fine control matters.
The blade is advanced by a fine screw feed that moves it 0.8 mm (1/32") per turn, and a lockable depth stop sets the final depth. A spring-loaded clamping collar holds the blade once set and gives clear feedback while adjusting. Cutting depth can be set up to 25.4 mm (1").
With the collar fully released, the blade can be removed and refitted in another position: in front of the post for general work, behind the post to reach right up to an edge, or sideways for hinge gains.
The body is ductile cast iron, machined and ground flat, with two large wooden knobs. A stainless steel and aluminium fence is available separately and mounts on either side; it works on both straight and curved edges. A handle hardware kit for turning your own knobs is also available separately.
Blades: high-carbon steel, one two-piece 12.7 mm (1/2") straight blade and one two-piece 12.7 mm (1/2") spear-point blade. Maximum depth 25.4 mm (1"). Weight 0.9 kg (2 lb). Made in Canada (except blades). Patented.
Supplied with two blades and a blade sharpening jig.
05P38.01
Data sheet
- Hyveltyp
- Grundhyvel
- Bredd (tum)
- 1/2" (13 mm)
- Material
- Segjärn
- Stål ingår
- Ja
Specific References
- EAN13
- 722356000083
- MPN
- 05P3801
- HS code
- 82053000
Yes, much of what you do with a router can be done with hand planes, quietly and without dust:
Router plane – flat bottoms in recesses, housings and inlays
Plough plane – grooves along the grain
Shoulder plane and rebate plane – rebates and tenons
Hand tools come in fewer sizes than router bits, so you have to adapt the dimensions to the blades available. In return you get full control and can work anywhere.
Our separate router plane blades fit the Veritas medium and large router planes. In the two smallest Veritas models, the small router plane and the miniature router plane, only the blades supplied with the plane fit.
If you want to be able to switch between blades, choose the medium or the large model. The medium model is not much bigger than the small one, while the miniature plane is much smaller. Unless you need a miniature plane to save space, the medium model gives you more options.
If you have an older router plane from another maker, compare the dimensions: the shank of our router plane blades is square and at most 12 × 12 mm. Compare that with the hole in the clamp of your plane.
Which plane to start with depends on what you will do, but for most people a smoothing plane (No. 4) or a jack plane (No. 5) is a good first choice. The smoothing plane gives smooth surfaces, and the jack plane is a versatile plane for both rough work and truing edges.
Low-angle jack planes such as the Lie-Nielsen No. 62 and the Veritas low-angle jack are also popular all-round planes. A block plane is a good addition for end grain and chamfers. The guide explains how the hand plane is built and which types exist.
Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.
Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.
Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.
Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.
How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
8 other products in the same category:
Large router plane for dadoes, grooves, hinge gains and inlay work cut to a precise depth. Screw feed with 0.8 mm (1/32") per turn, lockable depth stop and two 12.7 mm (1/2") blades included.