Veritas 3/32" Narrow Straight Blade for Router Plane

Yes, much of what you do with a router can be done with hand planes, quietly and without dust:

Router plane – flat bottoms in recesses, housings and inlays
Plough plane – grooves along the grain
Shoulder plane and rebate plane – rebates and tenons

Hand tools come in fewer sizes than router bits, so you have to adapt the dimensions to the blades available. In return you get full control and can work anywhere.

Our separate router plane blades fit the Veritas medium and large router planes. In the two smallest Veritas models, the small router plane and the miniature router plane, only the blades supplied with the plane fit.

If you want to be able to switch between blades, choose the medium or the large model. The medium model is not much bigger than the small one, while the miniature plane is much smaller. Unless you need a miniature plane to save space, the medium model gives you more options.

If you have an older router plane from another maker, compare the dimensions: the shank of our router plane blades is square and at most 12 × 12 mm. Compare that with the hole in the clamp of your plane.

There are several good ways to sharpen chisels and plane irons: water stones, diamond stones, oil stones and sharpening machines such as Tormek. All give sharp edges, but they differ in speed, maintenance and price.

A honing guide makes it easier to keep the same angle every time. The most important thing is to find a method you enjoy and use often. The guide helps you choose.

Read the guide here

Planes of cast iron and steel rust easily, especially in unheated workshops and from moisture on your hands. Wipe the plane after use and protect bare surfaces with a thin layer of wax or oil that will not mark the wood.

Store your planes dry, ideally in a plane sock or box. If rust has already formed, the guide shows how to clean and protect them.

Read the guide here

A new replacement iron can make an old plane better than it was when new. To find the right one, measure the iron's width, thickness and slot dimensions, and check whether the plane has a cap iron and what kind of adjuster it has.

A thicker iron chatters less but may require the mouth to be adjusted. The guide shows how to measure and choose correctly. You can also send us a photo of the iron with a rule beside it, and we will help you. We do not sell adjusting screws or other spare parts for old Stanley planes.

Read the guide here

Most products are restocked on an ongoing basis, but delivery times from the manufacturer vary. When an item is out of stock, the button Notify me when available appears on the product page.

Click the button and enter your email address, and we will email you as soon as the item is back in stock. If you are logged in, your email address is registered automatically. If you want to know when the next delivery is expected, you are welcome to contact us.

How often items are restocked depends on the supplier. We receive deliveries from Veritas about once a month, Lie-Nielsen ships in batches and we order from Incra about once a year. You can also add the item to a wishlist in your account, where you can see whether it is in stock.